Military Dress Shoes

I have a pair of black leather shoes Bates uniform. I want to know how to shine a gloss?

Spit Shine. http://usmilitary.about.com/cs/generalin ...

And, after getting a good pass brilliance shine black, spend neutral polish. This will really make them shine. But if you do this for a military inspection, you can not inspect. Some commands can not be neutral shoe polish used for inspections.

Hello, I was not sure if you were talking combat boots or Army Class A shoes? Dress shoes I suppose are the ones we carry in our class A.

Anyway, if you clean with a cloth and some Windex they shine perfectly!

Ahh. The brilliance of military footwear.

If they are what we like Reffe coraframs then they should already be pritty shiny. If they are taking a slightly damp cloth and rub over them and then rub with a dry cloth.

If they are not coraframs it is layers and layers of polish.
Put the shine on the shoes. Buff shoes with a brush, then with a soft cloth.
This process will take some time.
Sometimes if you get the hot wax with a lighter it makes the process go faster.
This takes much practice and I did not even try to do.

Get your shine box basic black.
Light lacquer for a few seconds to melt a little
Rub melted Polish startup.
Spitting on Polish as it begins to harden and dry (Acceptable Use a drop of water)
Buff with a brush, then with a cotton cloth.

Shine will be strong and if it is done several times will also show scratches.