Burton Stiletto

I think to make these connections
http://www.aspenskiandboard.com/Burton-S ...
I wonder if the baseplate is on my snowboard Solomon. In my current fixations, there are four screws that connect the links to the board of directors. (Sorry I do not know the correct terms for all sorts of things.)
Thank you

as they do not have the rail network, Burton binds with two base plates, one for their advice and counsel for each other

as they must Burton new track system on the brackets (TSE orther words) all work with Burton bindings with other councils. but you problums when you take other routes and put them on Burton boards. but most of the disc plates come with a spot on the back where theres a dock so you can drill. then put a new screw fasteners for other brands to fit Burton boards with 4 screws put in step 3. I did it with my love Burton and I had some connections niddecker. because Burton has a few tips about copyright there are connections to other compone cannot put this another hole. Then they do a little mold so you can do the job and screw through the plastic to make the appropriate connections.